P8511

Simple to use Temperature Websensor with input for external sensor. Easy to use web interface plus email alerts and SNMP support.

Features

  • Choice of sensors with varying cable lengths
  • Just connect to the Ethernet port and go
  • Email alerts
  • Traceable calibration certificate for the sensor
  • Includes power supply
  • SNMP alerts
  • Used for Frozen goods, foods and medicine monitoring
Code: 30270
0 in stock
1+ 5+ 10+ 25+
£115.65 £111.67 £106.17 £99.64
Prices Exclude VAT
Important
This part requires an external sensor(s). Please choose from Sensors & Accessories
Product supplied with:

The P8511 is a web sensor used to remotely monitor temperature via an external sensor. You have the choice of a 1, 2, 5 or 10 metre temperature probe to monitor the exact location required. The P8511 will email you if the temperature goes outside the defined safe settings plus supports SNMP and SNMP Trap.

This product is very popular in applications where a traceable calibration is required. It is extensively used in monitoring Fridges, freezers, cold rooms to monitor food, medicines, frozen goods etc.

Very simple to use the P8511 will require an external sensor. The sensor can be a temperature sensor, or a temperature and humidity sensor. We supply suitable sensors for this product, availabe in the sensors and accessories tab.

How it works

This product needs to be connected to an Ethernet port in your building. Power the unit up, connect to an Ethernet port, make sure the sensor(s), if external, are connected and use our free software to locate the device on your web browser. The instruction set shows you how to do this.

Once located, you can use the web browser software to configure this unit with desired sensor values, name sensors and email address that needs to see the alarm.

Software

All configuration software is free.

If you are using many of these parts or other parts in this family, we propose that you use the DBS software monitor (available in software and downloads tab). The DBS software monitor allows you to monitor a number of units in one place on your server or PC, and store all data history automatically on to your server and analyse when required.

P8511 Specifications

Modes of Communication

Modbus TCP: Modbus TCP protocol enables to read measured values, set alarm limits, adjust the probe.
Telnet: -Port 9999 enables to set alarm limits (lower, upper limits, hysteresis for measured values and time delay), e-mail addresses, SNMP addresses, probe description, refresh of www pages (10s to 65535s), set storing interval to history (10s to 65535s), enable each communication channel. Capacity of the history memory is 100 sets of temperature, humidity, pressure + computed values. Password protection of this port is enabled. Automatic IP address assignment from DHCP server is also enabled.
WWW pages: User selectable design of www pages enabling to display curve of measurement history. User can design the look of www pages and temperature, humidity, pressure + computed values history.
SNMP: It is possible to read actual values and alarm limits. In case of alarm creation warning message (trap) is sent to addresses defined by the user (maximum three addresses).
SOAP: Online transmitter enables to send actual measured data in the format of SOAP message to selected web server in preset interval 10-65535 s.

Online transmitter enables to monitor measured values. In case of exceeding of adjusted limits warning message can be sent to specified addresses. There are the following options of alarm indication:

Alarm Indication Options

E-mail: In case of alarm creation warning e-mail message is sent to addresses defined by the user (maximum three addresses) or via e-mail to SMS message. Basic SMTP authentication is supported.
SNMP: In case of exceeding of adjusted temperature, humidity, pressure + computed value limits alarm is activated and warning trap is sent to user specified IP addresses (maximum 3 addresses).
WWW pages: In case of exceeding of adjusted temperature, humidity, pressure + computed value limits active alarm is displayed on www page.
syslog: Online transmitter enables to send text messages to selected syslog server after different events appear. E.g. after transmitter restart, alarm activation, communication error with SNTP, after firmware change, after alarm termination, after communication error with SOAP server.

Synchronizing of time and record to www table and measured values history is enabled by SNTP via Internet

Dimensions of the case (W x H x D): 88 x 73 x 39,5 mm

Software Products

  • Online data acquisition system from Ethernet temperature, humidity, pressure sensors
    • Allows a number of Titanuim Remote monitoring products in one portal
    • Automatic download of data history to a spreadsheet
    • See all the connected Titanium series from any where through Internet
    • Graphical analysis of all data
    • Includes one Database Viewer
    • DBS Sensor Monitor
      1+
      £197.00

Sensors

  • Digital temperature probe, IP67, Silicone cable, -50 to 125°C with Cinch Connector for the Titanium series of remote monitors
    • Digital temperature sensor Dallas DS18B20
    • Temperature measuring range: -50 to 125°C
    • Accuracy of temperature measurment: ±0.5°C from -10 to +80°C, else ±2°C
    • IP protection: IP67 (Watertight)
    • Silicone Cable, 4.1mm diameter
    • Sensor cover: stainless steel, diameter 5.7mm, length 40mm
    • Cinch Connector
    • DSTG8/C 2m
      Digital temperature probe
      Stock: 0
      1+ 5+ 10+ 25+
      £40.75 £39.34 £37.41 £35.11
    • DSTG8/C 5m
      Digital temperature probe for P Series
      Stock: 0
      1+ 5+ 10+ 25+
      £51.62 £49.84 £47.39 £44.47
    • DSTG8/C 10m
      Digital Temperature probe
      Stock: 0
      1+ 5+ 10+ 25+
      £74.25 £71.69 £68.17 £63.97
    • DSTG8/C 1m
      Digital temperature probe
      Stock: 0
      1+
      £36.11
  • Digital temperature probe :IP67, PVC Cable -30 to +80°C with Cinch Connector for Titanium P85XX data loggers
    • Digital sensor Dallas DS18B20
    • Temperature measuring range: -30 to +80°C
    • Accuracy of temperature measurment: ±0.5°C from -10 to +80°C, ±2°C below -10°C
    • IP protection: IP67
    • PVC cable
    • Sensor cover: stainless steel, diameter 5.7mm, length 40mm
    • DSTGL40/C 1m
      Digital Temperature Probe Cable Length 1m
      Stock: 2
      1+ 5+ 10+ 25+
      £29.57 £28.55 £27.15 £25.48
    • DSTGL40/C 2m
      DSTGL40/C 2m
      Stock: 1
      1+ 5+ 10+ 25+
      £35.83 £34.59 £32.89 £30.87
    • DSTGL40/C 5m
      Comet Temp 10m / -30 to +80°C
      Stock: 0
      1+ 5+ 10+ 25+
      £38.76 £37.43 £35.59 £33.40
    • DSTGL40/C 10 m
      PROBE FOR P8511 +
      Stock: 0
      1+ 5+ 10+ 25+
      £42.97 £41.49 £39.45 £37.02
  • Family of Relative Humidity and Temperature sensors for Titanium series of remote monitors
    • Temperature Range 0 to +50°C
    • Temperature Accuracy ±2°C
    • Humidity range 0 to 100%RH (not condensing)
    • Humidity Accuracy ±3.5% RH (10% – 90% RH) at 25°C
    • Measured units: prercent of Relative humidity, degrees Celsius, degrees Fahrenheit
    • Cable: PVC, length 1m
    • Cinch Connector
    • IP 40
    • For P8xx1 family of Calibrated web based environmental monitors
    • DSRH01 1m
      Digital humidity-temperature probe for P8xx1 1m cable
      Stock: 2
      1+ 5+ 10+ 25+
      £80.73 £77.94 £74.11 £69.55
    • DSRH02 2m
      Digital humidity-temperature probe for P8xx1 2m cable
      Stock: 0
      1+ 5+ 10+ 25+
      £84.76 £81.84 £77.81 £73.02
    • DSRH05 5m
      Digital humidity-temperature probe for P8xx1 5m cable
      Stock: 0
      1+ 5+ 10+ 25+
      £96.87 £93.53 £88.93 £83.46
  • Digital temperature probe, IP67, PVC cable, -40 to +80°C, with Cinch Connector for the Titanium series of remote monitors
    • Temperature Range: -40 to +80°C
    • Sensor Cover: Polyamide, diameter 10mm, length 25mm
    • IP67 protection (Watertight)
    • Cable Type: PVC . Diemeter 4mm
    • DSTR162/C 2m
      DSTR162/C 2m
      Stock: 0
      1+ 5+ 10+ 25+
      £31.84 £30.74 £29.23 £27.43
    • DSTR162/C 5m
      DSTR162/C 5m
      Stock: 0
      1+ 5+ 10+ 25+
      £34.79 £33.59 £31.94 £29.97
    • DSTR162/C 10m
      DSTR162/C 10m
      Stock: 0
      1+ 5+ 10+ 25+
      £41.74 £40.31 £38.32 £35.96

Accessories

  • For connecting device to a hub
    • Cat 5 Patch Cable
    • Cat 5 Patch Cable 1m
      Stock: 217
      1+
      £3.60
  • 100-240V AC - 2.1mm x 5.5mm x 12mm centre +ve pin, 20W Multi Region Adapter
    • Multi-region power adapter
    • 110-240V input
    • 5V, 4A output
    • Power Supply 5V (2.1mm pin)
      Stock: 100
      1+
      £10.00
We're Listening